Want to know how to install a small wall mount bathroom sink? Then stay tuned…because in the next few minutes, we are going to show you a fairly easy, step-by-step method of installing one…without having to engage the help of a professional. In fact, this will prove to be a fantastic DIY project for anyone handy with a drill and a pair of pliers! Before we get into the meat and potatoes of this article though, here are a couple points to keep in mind. First off, in addition to numerous other benefits it offers, this particular household accessory adds a wonderful sense of style and elegance to any kitchen or washroom space. It is generally hung from a sturdy metal bracket, which is usually included with your purchase.
Also, it’s absolutely vital that there be some sort of support system in place on the wall, right behind the sheetrock, for the screws to hold the brackets in place. Once fitted in the correct manner, your small bathroom sink will be ready for use! Here’s how you do it…For starters, you will need the following things (you can get them from your local hardware store) :- power drill, P-trap kit, caulk gun, torpedo level, 2 hoses, tuve of tub and tile caulk, pair of channel lock pliers, drain kit, tube of plumber’s putty, crescent wrench (approximately size 10 or larger), pencil, pack of wall mounting screws, extension tail piece (this is only required if necessary), faucet and of course a small wall mount bathroom sink.
It’s now time to get started! Step one – It might be a good idea to assemble all of the above-mentioned items in one area, as this will give you easy access to everything. Step two – Using your pencil, mark a spot on the wall indicating exactly where you want to fit your sink. Next, place the mounting bracket at the desired position on the wall. The torpedo level may come in handy in this instance, as it will help you get the most accurate positioning of the holes. Don’t forget to mark the spot for your holes with a pencil. Thereafter, mount the bracket to the wall with a power drill. Moving on…step three – attach the faucet to the sink and carefully connect the water supply hoses to the former, using the crescent wrench and channel locks.
Important – do not put away those channel locks just yet, since you will also need them for connecting the tail piece and drain to the small wall mount bathroom sink. Step four – Before placing it through the hole of the sink, you’ve got to apply plumber’s putty to the drain flange lip. In case you didn’t know, the latter is actually the silver rim in the middle of your sink bowl – the part where the stopper sits. Applying the putty around this area is a good safety measure that’ll ensure that water will not escape through the drain and cause unnecessary water damage. Step five – Securely hang the sink on the bracket in order to mount it onto the wall. Then, place the torpedo level on the front lip to confirm that the sink is level.
Small Wall Mount Undermount Bathroom Sink
Step six – Use the crescent wrench to connect the hoses to the water supply stop handles on the wall. Wait until the drain has been fully connected before tuning on the handles. We are nearing the finish line…step seven – Locate the u-shaped pipe beneath your sink (this is known as the p-trap) and connect it to the tail piece coming from the drain. In case the tail piece is not long enough to reach the p-trap, you may use an extension piece to bridge the gap. Step eight – Open a tube of caulk and insert it into the caulking gun.
Apply a bead of caulk right around the edges of the small bathroom sink and press the caulk into the groves by gently running your index finger along the applied surface. Finally, make use of a moist sponge/wet piece of cloth to remove any excess caulking from the sink and wall. Well, that’s it for this article! We hope you found it useful and interesting. If you would like to obtain more info on the small wall mount bathroom sink, feel free to browse this website and check out the rest of the pages we have published for your viewing pleasure.